Block magnet south 50 x 45 x 15mm Ferrite Y35 - holds 3,5 kg

Delivery time: article is currently not available

Artikel ID
819
content
1 piece
1,55£

incl. 19 % VAT plus delivery costs



Block magnet south 50 x 45 x 15mm - holds 3,5 kg

 

Block magnets feature straight edges and are available in all proportions from cubes through to flat rectangular bars. Ferrite blocks are available in sizes from approx 10mm length up to 150mm length, with pull strengths exceeding 12kg. Block (or bar) magnets have completely flat surfaces that are perpendicular (at right angles) to each other, and are available in all scales from cubes through to long rectangular prisms. The dimensions for blocks are Length x Width x Height (mm).

 

Ferrite magnets can be used in a wide range of applications due to their high coercivity and low cost. They also have good machining properties which allows them to be cut into different shapes and sizes - they are cut with diamond tooling; standard drills and wire spark erosion techniques do not work. Ferrite has an excellent resistance to demagnetisation/corrosion, however care must be taken when handling the product due to its brittleness. Ferrite magnets can be used up to +250 degrees C making it ideal for use in electrical machines. At sub-zero temperatures e.g. less than -10 to -20 deg C, ferrite may start to show a reduced pull force (the temperature and the degree of weakening depends on the magnet shape and is application specific; for most uses this effect does not happen as the magnets never get that cold).

 

 

  

 

 

LxWxH mm  Magnetised Grade Weight g 
  25x10x10          axial               Y30      12,9
  40x20x10         axial               Y35      41,3
  60x20x15         axial               Y35      86,0
 100x100x25         axial               Y30     1250
 150x100x20         axial               Y35     1473

 

 

 

 

 

 

 

 

 

Applications of ferrite magnets

The ferrite magnets lend themselves to a variety of applications: from simple, such as magnetic locks for furniture or leather, magnetic lifters or magnetic separators, to the most sophisticated electric micromotors, which represent, along with speakers and some special magnetic applications, the areas of interest.

 

 

  Manufactured after 2013/01/01, The object of the declaration described above is in conformity with DIRECTIVE 2011/65/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL an the restriction of the use of certain hazardous substances in electrical and electronic equipment.

  • Y35, anisotrop - 50mm x 45mm x 15mm
  • No Plating
  • Vertical pull 3,5kg
  • Gauss
  • Ferrite - magnetized south

 

 

Product Code:

819

Pack Size:

1

Shape:

Rectangle

Magnetic Face:

50 x 45

Thickness:

15mm

Grade:

Y35 - south

Plating:

uncoated

Material:

Fe2O3 ( Ferrite )

Performance (Gauss):

*

Vertical Pull (Kg):

3,5

Slide Resistance (Kg):

*

Max Temp (degrees C):

250

Fixing:

Araldite/Loctite

 

Extreme Power Warning!

These magnets are dangerous! If your fingers are trapped between two of these magnets, they will be crushed! Please note that they should only be handled and used after a thorough risk assessment has been undertaken.

– It's been no review for Block magnet south 50 x 45 x 15mm Ferrite Y35 - holds 3,5 kg issued. –
Company
Last name*
Name*
Street
Postal code / city
Phone
Fax
Email*
Please contact me by phone

Notes / Comments
Please enter the word exactly as displayed in the image. Captchar Image


 The fields marked in bold are mandatory fields!
 
  You might also be interested in
  Recently Viewed Items
Nach oben