Here you will find answers to many frequently asked questions on magnets and magnetism. Contact us today for more information about our permanent magnets, and let us know how we can help with your specialty requirements. Large inventory of neodymium, samarium cobalt, alnico, ceramic and flexible magnets are also available for on-line purchase at our Magnet-Shop. Following we have listed a general index in magnetics.
The ancient Greeks and Chinese discovered that certain rare stones, called lodestones, were naturally magnetized. These stones could attract small pieces of iron in a seemingly magical way, and were found to always point in the same direction when allowed to swing freely, suspended by a piece of string, or floating on water. Early navigators used these magnets as rudimentary compasses to help them determine their direction while at sea.
The word "magnet" comes from Magnesia, a district in Thessaly, Greece where it is believed that the first lodestone was mined.
Over the years, magnets have evolved into the high-strength materials we have today. It was discovered that by creating alloys of various materials, one could create similar effects to those found in natural lodestone rocks, and increase the level of magnetism. ]
However, it was not until the 18th century that the first man-made magnets were created. Progress in creating stronger magnetic alloys was very slow until the 1920s when alnico magnet materials (an alloy of nickel, aluminum and cobalt) were formulated. Ferrite magnets were developed in the 1950s and rare-earth magnets in the 1970s. Since then, the science of magnetism has grown exponentially, and extremely powerful magnetic materials have made miniature and powerful devices possible.
What is a magnet?
Magnets can be made by placing a magnetic material, such as iron or steel, in a strong magnetic field. Permanent, temporary, and electromagnets can be produced in this manner.
The atoms forming materials that can be easily magnetized such as iron, steel, nickel, and cobalt are arranged in small units, called domains. Each domain, although microscopic in size, contains millions of billions of atoms and each domain acts like a small magnet. If a magnetic material is placed in a strong magnetic field, the individual domains, which normally point in all directions, will gradually swing around into the direction of the field. They also take over neighboring domains. When most of the domains are aligned to the field, the material becomes a magnet.
Domains before magnetization
Domains after magnetization
What does a magnet do?
Magnets do the following things:
Based on these effects, magnets transform energy from one form to another, without any permanent loss of their own energy. Examples of magnet functions are:
How are magnets made?
Modern magnet materials are made through casting, pressing and sintering, compression bonding, injection molding, extruding, or calendaring processes. Once manufactured, magnets often need to be further processed by grinding or other machining processes, and then assembled into a next level assembly.
There are many different types of permanent magnet materials, each with their own unique characteristics. Each material has a family of grades that have properties slightly different from each other, though based on the same composition.
What are permanent magnets made of?
Modern permanent magnets are made of special alloys that have been found through research to create increasingly better magnets. The most common families of permanent magnet materials today are made out of aluminum-nickel-cobalt (alnicos), strontium-iron ferrites, also known as ceramics, neodymium-iron-boron (a.k.a. neodymium magnets, or "super magnets"), and samarium-cobalt. (The samarium-cobalt and neodymium-iron-boron families are collectively known as the rare-earths).
What are Rare Earth Magnets?
Rare Earth magnets are magnets that are made out of the rare-earth group of elements. The most common rare-earth magnets are the neodymium-iron-boron (neo magnets) and samarium cobalt (SmCo magnets).
What is a temporary magnet?
Soft iron and certain iron alloys, such as permalloy (a mixture of iron and nickel) can be very easily magnetized, even in a weak field. As soon as the field is removed, however, the magnetism is lost. These materials make excellent temporary magnets, like those used in telephones and electric motors.
What are electromagnets?
Electromagnets are used when very strong magnets are required. Electromagnets are produced by placing a metal core (usually an iron alloy) inside a coil of wire that carries an electric current. The electricity in the coil produces a magnetic field. The strength of the electromagnet depends on the strength of the electric current and the number of coils of wire. Its polarity depends on the direction of the current flow. While the current flows, the core behaves like a magnet, but as soon as the current stops, the magnetic properties are lost. Electric motors, televisions, maglev trains, telephones, computers, and many other modern devices use electromagnets.
What are eddy currents?
These are electrical currents that are induced when a magnetic field moves in relation to an electrical conductor that has been placed within reach of the magnetic field. In turn, these eddy currents create a magnetic field that acts to stop the relative motion of the original magnetic field and electrical conductor.
Are there industry standards for magnets?
Yes. Standards have been established by the Magnetic Materials Producers Association (MMPA) and the Magnet Distributors and Fabrications Association (MDFA). Both of these associations are now a part of the International Magnetics Association.
How do I order magnets?
To efficiently order magnets, you need to have a good idea of what you want to accomplish. Here are a few items to consider:
How permanent is a magnet’s strength?
If stored away from factors that adversely affect the magnet such as power lines, other magnets, high temperatures etc., a magnet will retain its magnetism essentially forever.
What might affect a magnet’s strength?
Factors that can affect a magnet's strength include:
Shock and vibration do not affect modern magnet materials, unless sufficient to physically damage the material.
Will magnets lose their power over time?
Modern magnet materials do lose a very small fraction of their magnetism over time. With samarium cobalt magnets, for example, this has been shown to be less than 1% over a period of ten years.
Which are the strongest magnets?
The most powerful magnets available today are the rare- earth types. Of the rare-earths, neodymium magnets are the strongest. However, at elevated temperatures (of approximately 150°C and above), samarium cobalt magnets can be stronger than neo magnets, depending on the magnetic circuit.
What are superconductors?
These are the strongest magnets. They don't need a metal core at all, but are made of coils of wire made from special metal alloys which become superconductors when cooled to very low temperatures.
Can I make a magnet that I already have stronger?
Once a magnet is fully magnetized, it's "saturated" and cannot be made any stronger. In that sense, magnets are like buckets of water: once they are full, they can't get any "fuller".
Can a magnet that has lost its magnetism be re-magnetized?
Provided that the material has not been damaged by extreme heat, most magnets can be re-magnetized back to their original strength.
How do you measure the strength or power of a magnet?
Most commonly, Gaussmeters, magnetometers, or pull-testers are used to measure the strength of a magnet. Gaussmeters measure the strength in Gauss; Magnetometers measure in Gauss or arbitrary units (making it easy to compare one magnet to another); pull-testers measure pull in pounds, kilograms, or other force units. Helmholtz Coils, search coils and permeameters are also used to make sophisticated measurements of magnets.
If I have a neo magnet with a Br of 12,300 Gauss, will I be able to measure 12,300 Gauss on its surface?
No. The Br value is measured under closed-circuit conditions. A closed-circuit magnet is not of much use. In practice, you will measure a field that is less than 12,300 Gauss close to the surface of the magnet. The actual measurement will depend on whether the magnet has any steel attached to it, how far away from the surface you make the measurement, and the size of the magnet (assuming that the measurement is being made at room temperature). For example, a 1" diameter Grade 35 neodymium magnet that is ¼" long will measure approximately 2,500 Gauss when 1/16" away from the surface, and 2,200 Gauss when 1/8" away from the surface.
What is the strength of the earth’s magnetic field?
The surface field strength of the earth is about 0.5 gauss, but it varies by as much as 10% depending on the strength of the crustal field. A range from 0.85 to 0.45 can be found across the globe. Geomagnetic storms can cause changes of between 1% to 5% that last from a few hours to a full day.
How does a magnet’s strength drop off over distance?
The strength of a magnetic field drops off more or less exponentially over distance.
What is the governing equation for field strength relative to distance?
For a circular magnet with a radius of R and length L, the field Bx at the centerline of the magnet at distance X from the surface can be calculated by the following formula, where Br is the residual induction of the material):
There are additional formulae that can be used to calculate the field from a rectangular magnet and magnets in other configurations. Use our on-line calculators to determine your own field levels.
What can I use to block a magnetic field?
Only materials that are attracted to a magnet can "block" a magnetic field. Depending on how thick the blocking piece is, it will partially or completely block the magnetic field.
What are magnetic poles?
Magnetic poles are the surfaces from which the invisible lines of magnetic flux emanate and connect on return to the magnet.
What are the standard definitions of “North” and “South” pole?
The north pole is defined as the pole of a magnet that, when free to rotate, seeks the north pole of the earth. In other words, a magnet's north pole will seek the earth's north pole. Similarly, the south pole of a magnet seeks the south pole of the earth.
Can a particular pole be identified?
Yes, the north or south pole of a magnet can be marked if specified.
How can you tell which is the North Pole if it’s not marked?
You can't tell by looking. You can tell by placing a compass close to the magnet. The end of the needle that normally points toward the north pole of the earth would point to the south pole of the magnet.
How do lines of magnetic flux behave?
Lines of force are three-dimensional, surrounding a bar magnet on all sides.
Like poles repel and unlike poles attract. When opposite poles of a magnet are brought together, the lines of force join up and the magnets pull together.
When like poles of a magnet are brought together, the lines of force push away from each other and the magnets repel each other.
What does “orientation direction” mean?
Most modern magnet materials have a "grain", in that they can be magnetized for maximum effect only through one direction. This is the "orientation direction", also known as the "easy axis", or "axis".
Un-oriented magnets (also known as "isotropic magnets") are much weaker than oriented magnets, and can be magnetized in any direction. Oriented magnets, also known as "anisotropic magnets", are not the same in every direction- they have a preferred direction in which they should be magnetized.
How are magnets rated?
Magnets are characterized by three main characteristics:
Residual Induction: Given the symbol Br, and measured in Gauss, this is an indication of how strong the magnet is capable of being.
Coercive Force: Given the symbol Hc, and measured in Oersteds, this is an indication of how difficult it is to de-magnetize the magnet.
Maximum Energy Product: Given the symbol BHmax, and measured in Gauss-Oersteds, this is an indication of what volume of magnet material is required to project a given level of magnetic flux.
What are the properties of commonly used magnet materials?
How can I use this information?
Given a magnet size, you can estimate how much magnetic flux different materials will project at a given distance. You can also use this information to compare one material to another.
Example: How much more flux will a neodymium grade 35 magnet project as compared to a ceramic grade 5 of the same dimension at a given distance? Simply divide the Br of the neo 35 by the Br of ceramic 5 (12300/3950) to get 3.1. This means that the neo grade 35 will project 3.1 times the flux a same-size ceramic grade 5 would at a given distance.
Given the flux required at some fixed distance from the magnet, you can use this information to estimate what magnet volume will be required for different magnet materials.
Example: What volume of ceramic-5 magnets would give the same flux as a neodymium grade-35 magnet at a given distance? Simply divide the BHmax of neo-35 by the BHmax of ceramic-5 (35/3.6) to get 9.7. This means that the volume of the ceramic-5 magnets would have to be 9.7 times that of the neo-35 magnet to give you the same flux.
What are the maximum recommended operating temperatures for different magnet materials?
The maximum temperature at which a magnet will be effective depends greatly on the permeance coefficient, or "Pc" of the material. The Pc is a function of the magnetic circuit in which the magnet operates. The higher the Pc (the more "closed" the circuit), the higher temperature at which the magnet can operate without becoming severely demagnetized.
What is maximum temperature a magnet can operate at not a set value?
Magnets function at different levels of efficiency given different circuits that they operate in. The more closed the circuit the magnet is operating in, the more stable it is, and the less effect temperature will have on it.
Can magnets be machined?
Yes, magnets can be machined. However, hard magnet materials are extremely difficult to machine, unlike flexible or rubber-type magnet materials. Magnets should be machined in the unmagnetized state as much as possible, using diamond tools and/or soft grinding wheels. In general, it is best not to try to machine hard magnet materials unless you are familiar with these specialized machining techniques.
How much does it cost to machine magnets?
Factors that determine the cost to machine magnets include:
What is a magnetic assembly?
A magnet assembly consists of one of more magnets, along with other components, such as steel, that generally affect the functionality of the magnet.
How should magnets be assembled to my device?
If a magnet must be fastened to a device, you can use either mechanical means or adhesives to secure the magnet in place. Adhesives are often used to secure magnets in place. If magnets are being adhered to uneven surfaces, an adhesive with plenty of "body" is required so that it will conform to the uneven surface. Hot glues have been found to work well for adhering magnets to ceramics, wood, cloth, and other materials. For magnets being adhered to metal, "super glues" can be used very effectively.
Magnosphere can supply flexible magnets with adhesives already attached; simply peel off the liner and attach the magnet to your product.
Tips on handling and storing magnets
Magnosphere offers best priced Neodymium magnets globally to all industries, including Automotive, Aerospace, Military, Advertising, Design House, Electronic and Academic/R&D. Please inquire for custom Neodymium magnets or magnetic assembly.
We can also custom manufacture these to fit your exact specifications using our in-house global manufacturing facilities and team of experienced engineers. Need high quantities of magnets at the lowest and fairest price possible? Just let us know what you are looking for and contact our Customer Care Team by sending us a request for quote! We'll work with you to determine the most economical way of providing you with what you need.