5 x Block Magnet countersunk 40 x 10 x 3mm Neodymium N35 - S-pole - 5 pieces

Delivery time: article is in stock

Artikel ID
5 piece

incl. 19 % VAT plus delivery costs

Block magnet 40 x 10 x 3 mm with countersunk borehole

N35, nickel-plated - 5 pieces


Neodymium block magnets are made of a powerful Neodymium magnet sunken in to a stainless steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The stainless steel pot increases the adhesive force of the magnets giving them an incredible hold for their size and also increases their resistance to corrosion. An added advantage of block magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets are counter-bored on the magnetic face and can be fixed to a surface with a screw, block magnets are also available with countersinks and threaded studs.


Strong neodymium magnets with countersunk and counterbore holes:

Tapered / countersunk holes fit a standard flat head screw.

Countebore holes fit a pan head screw, nut, or bolt head.

Magnets may be purchased in matching pairs for a magnet to magnet attachment.

Strongest magnetic performance

Nickel plated - N35 grade material - 80°C max operating temperature



A -          B -           C - 

A - Opposite Poles attract

B - Similar Poles repel

C - All Polarities attract to metal


Please note: In order to better present the products, the image was magnified. Please check the size before buying!


  5 x Block Magnet countersunk  40 x 10 x 3mm Neodymium N35 - S-pole    5 x Block Magnet countersunk  40 x 10 x 3mm Neodymium N35 - S-pole - 5 pieces


Attention | Hint

NdFeB magnets are no toys - especially with thiner measurements, they can easily break or split! Therefore an uncontrolled collision of two magnets as well as mechanical hits or compressive stress should be avoided!




  Manufactured after 2013/01/01, The object of the declaration described above is in conformity with DIRECTIVE 2011/65/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL an the restriction of the use of certain hazardous substances in electrical and electronic equipment.

  • with 2 counterbore S-pole
  • Magnetisation N35 | max. Operating temperature 80 ° C | magnetisation direction: axial
  • Adhesion force 5.3 kg / 55 N | Total weight: 12 g
  • Total height: H:3 mm | Length:40 mm | Width:10 mm


Technical Specifications:

Magnosphere - Artikel number 1989
Form / Model Block magnet
Material NdFeB
Coating NiCuNi ( Nickel )
Length 40 mm
Width 10 mm
Height 3 mm
Tolerance + / - 0,1 mm
Magnetisation / Grade N35
Magnetisation direction Axial
Adhesion ca. 5.3 kg / 55 N
Weight ca. 12 g
Max. Temperatur 80°C
Production method sintert


magnetic      P125DH-2H-FS         

Rate this Item
Name Comment Security code Captchar Image
– It's been no review for 5 x Block Magnet countersunk 40 x 10 x 3mm Neodymium N35 - S-pole - 5 pieces issued. –
Last name*
Postal code / city
Please contact me by phone

Notes / Comments
Please enter the word exactly as displayed in the image. Captchar Image

 The fields marked in bold are mandatory fields!
  You might also be interested in
  Recently Viewed Items

Nach oben