Galvanized body, neodymium magnetic core, anisotropic, working temperature max. +80°C. The holding force is determined at room temperature (20°C) on a polished plate made of mild steel with a thickness of 10 mm by pulling the magnet vertically from the surface (1 kg ≈ 10 N). A deviation of -10% in the stated values is possible in exceptional cases. In general, the value will be exceeded.
Pot magnets with neodymium magnetic core have excellent holding force thanks to use of anisotropic neodymium (NdFeB) magnets. The maximum working temperature of these types is up to +80°C, steel body is galvanized. These types are used in applications where high holding force and small dimesions are required.
Flat pot magnets with neodymium magnetic core are available in the following formats:
|D mm||d mm||H mm||L mm||Thread M||Pull* N||Weight g||Temperatur °C|
3 + years
Magnets aren't toys and not intended for children under 14 years of age. Small magnets represent danger of suffication if swallowed!
Manufactured after 2013/01/01, The object of the declaration described above is in conformity with DIRECTIVE 2011/65/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL an the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Flat pot holding magnet threaded insert
Ø 6 mm to Ø 32 mm
|Thread jack||M3 to M5|
up to 35 kg
Max Temp (° C):