Flat gripper Flat pot holding magnet threaded bushing in hard ferrite

 

Ferrite Pot Magnets utilise Ferrite magnets to give a good level of hold at an economical price. This arrangement gives many advantages, the magnet can be supplied with a tapped hole, a countersunk hole or with a threaded stud for convenient mounting. Magnetism is confined to one face only, where it is concentrated to give the maximum holding force possible for the size of the magnet employed. Pot magnets do not chip or crack with constant impacting onto a steel surface which is another large advantage.

 

Product Description

  • For easy installation in devices
  • It is installed by screwing out

 

Application

  • Hard ferrite
  • Surface is galvanised and screened
  • with threaded socket

 

Technical Data

  • The recommended operating temperature is max. 200 ° C

 

Design Flat pot magnet hard ferrite with threaded bushing
Magnetic system / type U-shaped pole plates system, shielded system
Magnetic materials hard ferrite, ferrite Y30 anisotropic
max. Operating temperature 200° C
fastening screwing
Area of ​​application With a flat design
Housing / pot metal, nickel-plated
Weight about 499 g

 

 
D mm
d mm
H mm
L mm
Thread M
Pull* N
Weight g
Temperatur °C
10+0.1/-0.1 6+0.1/-0.1 4.5+0.2/-0.1 11.5+0.3/-0.2 M3 4 3 200
13+0.1/-0.1 6+0.1/-0.1 4.5+0.2/-0.1 11.5+0.3/-0.2 M3 10 4 200
16+0.1/-0.1 6+0.1/-0.1 4.5+0.2/-0.1 11.5+0.3/-0.2 M3 18 6 200
20+0.1/-0.1 6+0.1/-0.1 6+0.2/-0.1 13+0.3/-0.2 M3 30 11 200
25+0.1/-0.1 8+0.2/-0.2 7+0.3/-0.2 15+0.5/-0.3 M4 40 20 200
32+0.1/-0.1 8+0.2/-0.2 7+0.3/-0.2 15+0.5/-0.3 M4 80 31 200
36+0.2/-0.1 8+0.2/-0.2 7.7+0.3/-0.2 16+0.5/-0.3 M4 100 42 200
40+0.2/-0.1 8+0.2/-0.2 8+0.3/-0.2 16.5+0.5/-0.3 M4 125 57 200
40+0.2/-0.1 10+0.2/-0.2 8+0.3/-0.2 18+0.5/-0.3 M5 125 59 200
47+0.2/-0.1 8+0.2/-0.2 9+0.4/-0.2 17+0.6/-0.3 M4 180 86 200
47+0.2/-0.1 12+0.2/-0.2 9+0.4/-0.2 21+0.6/-0.3 M6 180 91 200
50+0.2/-0.1 8+0.2/-0.2 10+0.4/-0.2 18.5+0.6/-0.3 M4 220 105 200
50+0.2/-0.1 12+0.2/-0.2 10+0.4/-0.2 22+0.6/-0.3 M6 220 111 200
57+0.2/-0.1 8+0.2/-0.2 10.5+0.5/-0.2 18.5+0.7/-0.3 M4 280 147 200
57+0.2/-0.1 12+0.2/-0.2 10.5+0.5/-0.2 22.5+0.7/-0.3 M6 280 153 200
63+0.3/-0.1 8+0.2/-0.2 14+0.5/-0.2 22+0.7/-0.3 M4 350 228 200
63+0.3/-0.1 15+0.2/-0.2 14+0.5/-0.2 30+0.7/-0.3 M8 350 245 200
80+0.3/-0.1 12+0.2/-0.2 18+0.5/-0.2 28.5+0.7/-0.3 M6 600 477 200
80+0.3/-0.1 20+0.2/-0.2 18+0.5/-0.2 34+0.7/-0.3 M10 600 499 200
100+0.5/-0.1 22+0.2/-0.2 22+0.5/-0.2 43+0.7/-0.3 M12 900 956 200
125+0.5/-0.1 25+0.2/-0.2 26+0.5/-0.2 50+0.7/-0.3 M14 1300 1720 20

 

WARNING!

 

Magnets aren't  toys and not intended for children under 14 years of age. Small magnets represent danger of suffication if swallowed!

 

 

  Manufactured after 2013/01/01, The object of the declaration described above is in conformity with DIRECTIVE 2011/65/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL an the restriction of the use of certain hazardous substances in electrical and electronic equipment.

  • Diameter: Ø 10 mm to Ø 125 mm
  • Thread jack: M3 to M14
  • Material: Ferrite: ( HF), Case Material: Steel, Shell Plating: Zinc
  • Holding force: 510 N (approx. 51kg )
  • Maximum operating temperature: 200 ° C, Magnetization direction: axial

 

Technical Specifications:

Item Number

1083

Shape

Flat pot holding magnet threaded insert

Diameter

Ø 10 mm to Ø 125 mm

Holding power

up to 130 kg

Coating

Zinc

Color galvanized

Material:

Ferrite

Max Temp (° C):

200° C

 

Rate this Item
1
1
2
3
4
5
Name Comment Security code
THOMAS 2017-12-29 19:21:34
gute Haltekraft, Qualität voll in Ordnung, preislich auch ok, würde ich wieder kaufen.

Please note our information on the General Data Protection Regulation (GDPR)

Company
Last name
Name
Street
Postal code / city
Phone
Fax
Email
Please contact me by phone

Notes / Comments
The fields marked in bold are mandatory fields! 
 

Please note our information on the General Data Protection Regulation (GDPR)

onal tabs -->
  You might also be interested in
  Recently Viewed Items