Rubber Coated Magnetic System with Countersunk Hole
Rubber Covered Neodymium Pot Magnet – These rubber covered pot magnets have an external thread. Strong Neodymium Magnet is embedded in a steel Pot. The steel pot increases the adhesive force of the magnet on direct contact with a thick iron surface. If there is no direct contact with the counterpart, or if the steel plate is thin, painted or rough, pot magnet will be much less strained. Shear Force: The indicated adhesive force is measured perpendicular to the surface to which the magnet should stick. It takes a lot less strength to move the magnet sideways. Therefore, pot magnet less stained on a wall as opposed to used on the ceiling. Magnetic Properties: Super strong magnetic force and intrinsic coercive force. Good in ambient temperature. High anti-corrosion and stable performance.
Uses for our Countersunk Neodymium Pots with Rubber Casing
Countersunk Neodymium Pot Magnets by Magnosphere – Our strong ring neodymium magnets with sunken hole could be even stronger! In this category you find our countersunk neodymium pot magnets. The holding core is a strong ndfeb magnet with 90° countersunk hole (Powerful rare earth neodymium permanent magnet) built in a steel pot. Not only will the steel pot keep the magnet safe from damages but also the magnetic force is higher! Because of the steel there is only one side that can be attached. The optimal surfaces are steel and iron. These magnets dimension is D 10mm to 80mm dia, the H is 4.5mm to 10.5mm. These magnetic pots weight is 3g to 655g and The pot coating is Ni-Cu-Ni plating, Zn-plated or Chrome-coated for a durable, quality finish. We offer an extensive holding force range of magnetic lenses with countersink hole is lifting up 1kg to lifting up 192kg, it is super strong powerful for mounting and holding. These are the ideal magnets for when intense holding power is required.
Special feature: these magnets can be fixed or mounted using screws. For this reason we suggest to place and glue them in a drilled pilot hole and can be used at a temperature up to 80°C / 100°C.
Rubber coated magnetic systems Versions are available
- Magnet assembly, NdFeB, rubber coat, with screwed bush
- Magnet assembly, NdFeB, rubber coat, with external thread
- Magnet assembly, NdFeB, plastic coat, rubberized holding surface
- Magnet assembly, NdFeB, rubber coat, with cylinder bore
- Magnet assembly, NdFeB, rubber coat, with bore and counter bore
- Magnet assembly, NdFeB, rubber coat, with internal thread
- Magnet assembly, NdFeB, rubber coat, with internal thread, rectangular
- Magnet assembly, hard ferrite or NdFeB, rubber coat, black, rectangular
- Magnet assembly made of NdFeB, rubber coat, black, with handle
- Magnet assembly, NdFeB, rubber coat, for cable mounting
- Magnet assembly, hard ferrite or NdFeB, rubber coat, black, with bore and counterbore
- Custom-made Rubber coated systems
- Other sizes, shapes and grades may be available by special request.
Magnetic systems with rubber or plastic jacket coat
Rubber Coated magnetic systems with neodymium magnets for demanding tasks. The rubber-coated adhesive surface protects the metal from scratches and grounds for detention increases the pushing force. The neodymium magnets are arranged alternately pole and thus increase the adhesive force. As material for the rubber sheath Santoprene was used. They can be mounted with different exposures (threaded stud, threaded socket, female threaded, hole or depression).
Who supplies high quality Rubber Coated Magnetic System with Countersunk Hole?
Magnosphere offers best priced Male Thread Neodymium Pots with Rubber Casing globally to all industries, including Automotive, Aerospace, Military, Advertising, Design House, Electronic and Academic/R&D. Please inquire for custom Neodymium magnets or magnetic assembly.
Buy Rubber Coated Magnetic System with Countersunk Hole at Magnosphere and get a better deal!
We routinely manufacture magnets to our customers' specifications. We have assisted many Fortune 500 companies produce magnets for their specific application. We have the ability to produce magnets with varying magnetic properties, pole orientation, size, shape, temperature range, protective coatings and mechanical properties. We specialize in rare-earth magnetic materials and can produce magnets in Alnico, Ceramic Ferrite, NdFeB and SmCo materials. We can produce both sintered and bonded magnetic materials. If you have a specific requirement, contact us to discuss your application. Need high quantities of magnets at the lowest and fairest price possible? Contact our Customer Care Team !