holds 400g

 

Disc magnets have a diameter greater than thickness, and are available in sizes approx 8mm diameter up to 30mm. Pull strengths begin at around 103g and can reach up to 1.1kg. For Ferrite magnets in a cylindrical shape, see our Rods section. These round disc magnets can be easily affixed into drilled holes. The dimensions for disc magnets are measured "Diameter  x  Height". The discs are magnetised from top-to-bottom through the thickness.

 

Ferrite magnets can be used in a wide range of applications due to their high coercivity and low cost. They also have good machining properties which allows them to be cut into different shapes and sizes - they are cut with diamond tooling; standard drills and wire spark erosion techniques do not work. Ferrite has an excellent resistance to demagnetisation/corrosion, however care must be taken when handling the product due to its brittleness. Ferrite magnets can be used up to +250 degrees C making it ideal for use in electrical machines. At sub-zero temperatures e.g. less than -10 to -20 deg C, ferrite may start to show a reduced pull force (the temperature and the degree of weakening depends on the magnet shape and is application specific; for most uses this effect does not happen as the magnets never get that cold).

 

 

20 x Round Circle Disc Magnets Ø 10 x 10 mm Ceramic Ferrite Y35 - holds 400g   Round Circle Disc Magnets Ø 10 x 10 mm Ceramic Ferrite Y35 - holds 400g

 

Applications of ferrite magnets

The ferrite magnets lend themselves to a variety of applications: from simple, such as magnetic locks for furniture or leather, magnetic lifters or magnetic separators, to the most sophisticated electric micromotors, which represent, along with speakers and some special magnetic applications, the areas of interest.

 

100% RoHS compliantProduct complies with the RoHS-Directive

 

This product complies with the European RoHS-Directive (2002/95/EC - RoHS - Restriction of Hazardous Substances) Directive on the restriction of use of certain hazardous substances in electrical and electronic equipment. Not subject to registration under REACH.

 

 

  • Disc Magnet Ø 10 mm x 10 mm
  • Ferrite Y35
  • pulls 400 g
  • Magnetisation: axial
  • Working temperature: 250°C
 

Technical Specifications:

Product Code

1871

Magnetic-Model-Shape

Disc / Rod

Material

Fe2O3 ( Ferrit )

Plating

uncoated

Magnetization quality

Y35

Max Temp (degrees C)

250° C

Magnetization

axial

Weight

4 g

Volume

785 mm³

Overall Dimension

Ø 10 mm x 10 mm

Height:

H 10 mm

Diameter

D 10 mm

Remanence Br (kG)

min. 4,1

Remanence Br (T)

min. 0,41

Coercivity bHc (kOe)

min. 2,6

Coercivity bHc (kA/m)

min. 208

Coercivity iHc (kOe)

min. 2,7

Coercivity iHc (kA/m)

min. 212

Energy product (BxH) max MGOe

min. 3,8

Energy product (BxH) max kJ/m³

min. 30,4

Flux density (Gauss)

*

Adhesive force (Kg)

0,4

Sliding resistance (Kg)

*

 

magnetic       Round Circle Disc Magnets Ø 10 x 10 mm Ceramic Ferrite Y35Round Circle Disc Magnets Ø 10 x 10 mmRound Circle Disc Magnets Ø 10 x 10 mm - holds 400g

Rate this Item
1
1
2
3
4
5
Name Comment Security code
– There is no rating for Disc Magnet Ø 10 x 10mm Ferrite Y35 no coating - pull 400 g yet. –

Please note our information on the General Data Protection Regulation (GDPR)

Company
Last name
Name
Street
Postal code / city
Phone
Fax
Email
Please contact me by phone

Notes / Comments
The fields marked in bold are mandatory fields! 
 

Please note our information on the General Data Protection Regulation (GDPR)

onal tabs -->
  You might also be interested in
  Recently Viewed Items