Electro-holding-magnets Electromagnet Solenoid, with connector 12V / 24V

Artikel IDs
2321
content
1 piece
scaled price
amount scaled price
from quantity 1 42,50 GBP
from quantity 3 35,15 GBP
from quantity 10 33,01 GBP
from quantity 20 31,72 GBP
from quantity 40 29,58 GBP
from quantity 100

You have not chosen a variant yet.


Holding magnets from Magnosphere

 

In the case of holding magnets, Magnosphere differentiates between electromagnetic holding magnets, permanent electromagnetic holding magnets and door holding magnets. The electro holding magnet consists of a DC-energized coil, which reaches a holding force of up to 30,000N when energized. For long holding especially the permanent-electro-magnet is suitable, since they reach a holding force up to 3,500N in the de-energized state. The Magnosphere holding magnets are available both as round pot magnets and as holding bars. Door holding magnets are used in the area of ​​the fire doors. The magnets comply with strict safety guidelines and exist in various designs, each designed for floor, wall or ceiling mounting.


Holding magnets from Magnosphere are pot magnets that are used to hold or clamp ferromagnetic workpieces. The electromagnets are preferably used in fixture construction and in the industrial areas automation, transportation and handling. For tasks involving long periods of holding without energy consumption, permanent electromagnets offer advantages. They ensure that a load or workpieces are safely held in the event of a power failure.

 

Solenoid/Electromagnet:- Electrical current is required to turn the magnet ON. Power is removed to turn the magnet OFF

 

Outer shell is a sturdy bright nickel plated cylinder, passivated with body mounting. Designed for surviving demanding clamping applications.

The Energise to Hold Electromagnet is a standard electromagnet concept – a solenoid (wound copper coil) within a high quality high permeability iron assembly for high clamping forces and low magnetic losses. The iron cylinder of the energise to hold electromagnet is of sturdy design with a bright nickel finish passivated with body mounting. Armature plates (keeper plates) exist to suit each energise to hold electromagnet unit. The energise to hold electromagnet has one central and three equi-spaced (on a PCD) tapped holes on the rear face.
 

Depending on the size, the energise to hold electromagnet has three styles of electrical connection:- free leads, two-pole connector and Magnosphere connectors. The energise to hold electromagnet has, depending on the size, three supply voltages:- 12V dc, 24V dc and 240V ac. The energise to hold electromagnet has an ED rating of 100%. The energise to hold electromagnet has an IP rating of 54 (20 for the two-pole connector version). The energise to hold electromagnets have maximum possible pull force ratings from 113N up to 3500N (11kg to 350kg) depending on the size of unit (the actual pull achieved will depend on the application).
 

Pull strength with an air gap of 0mm
Product diameter 20 25 30 40 50
Magnetic pull (kg) 5.3 11.3 25.3 57.5 109.7

 

Pull strength with an air gap of 0mm
Product diameter 65 80 100    
Magnetic pull (kg) 167.7 200 350    


Pull force conversion (approximate):- 1kg = 10N = 2.2lb.

High-quality permeable iron for low remanence
 

Operating voltage 12VDC, 24VDC & 240VAC (Magnosphere connector with rectifier)
Connector options* Free leads, two-pole connector or Hirshman connector with rectifier
Mountings Threaded hole/s in rear face of magnet
Finish Bright nickel plated with machined face
Holding Force Up to 1677N

 

 

  • electric holding magnet, with connector, 12V / 24V operating voltage
  • Diameter Ø 40 mm - Ø 100 mm
  • Supply Voltage V DC: 12V or 24V
  • Connector Type: block connector, with threaded holes on the back

 

Article Number:                              

2321

Form:

Cylinder

Dimensions: (mm):

Ø 40 - 100 mm        

Supply Voltage V DC:

12V or 24V

Current:

12V - 180 mA / 180mA

24V - 90 mA / 140 mA

εD-Assessment: 100%

IP-Assessment:

54

Connector Type:

free cable, 500 mm long

Operating Temperature:

35°C

Surface:

bright nickel plated

Mounting:

Threaded holes on the back  

Pull Force:

1kg = 10N = 2.2lb.

 

– There is no rating for Electro-holding-magnets Electromagnet Solenoid, with connector 12V / 24V yet. –

Please note our information on the General Data Protection Regulation (GDPR)

Company
Last name
Name
Street
Postal code / city
Phone
Fax
Email
Please contact me by phone

Notes / Comments
 The fields marked in bold are mandatory fields!
 

Please note our information on the General Data Protection Regulation (GDPR)

  You might also be interested in
  Recently Viewed Items

ROHS-Richtlinie

Magnosphere magnet products conform to the standards set forth in EU Directive 2002/95/EC, RoHS (Restriction of Hazardous Substances), EU Directive 2002/96/EC (Waste Electrical and Electronic Equipment) and REACH (Registration, Evaluation and Authorization of Chemicals). Magnosphere magnet products conform to the standards set forth in EU Directive 2002/95/EC, RoHS (Restriction of Hazardous Substances), EU Directive 2002/96/EC (Waste Electrical and Electronic Equipment) and REACH (Registration, Evaluation and Authorization of Chemicals).


Magnete aus Neodym (NdFeB) - Die Supermagnete, starke Magnete, Neodym-Magnete, Starke Neodym Magnete, Magnetfolie, Magnetband, Magnetstreifen, Magnetklebeband, Magnetschilder, Magnetetiketten, Magnetleiste, Werkzeughalter, Messerhalter, Messerblock magnetisch, Schlüsselbrett, Eisenfolie, Ferrofolie, Metallfolie, Eisenband, Ferroband, Metallband, Stahlband, Selbstklebende Neodym Magnete, Magnete für Magnettafel, Starke Magnete, Neodym-Magnete, Ferrite, Ferrit-Magnete, SmCo Samarium Magnets, Alnico Magnete, Dauermagnete, Permanentmagnete, Supermagnete, Kühlschrankmagnete, Büromagnete, Organisationsmagnete, Schulmagnete, Magnete Tier, Hufeisenmagnet, Magnethaken, Magnetöse, Topfmagnet mit öse, Scheibenmagnet, Ringmagnet, Stabmagnet, Magnetsysteme, Taschenlampe

We take a great deal of pride in providing outstanding customer care. We understand that without our customers, we wouldn’t be here. If you have any questions about your order or a general enquiry, please call or email us! info@magnosphere.co.uk - 24 hours a day including holidays! Our customer service team is available to help you!


Nach oben